Precautions in usage of foam machinery
1, check whether the loosening of screws, the spindle rotation is flexible.
2, the correct installation of the motor and its circuit. The motor adopts three-phase 380V heating plate using 220V current.
3, make the body good grounding protection.
4, test of machine spindle is turned to the right.
5, the heating power supply is preheated to a barrel body shell melting bubble, and pay attention to every extrusion must be so that the upper and lower barrel material dissolved completely before starting the machine, used for large rotating wheel flexible. Because the head residual material soluble block, recommend the use of burner for preheating on the head.
6, flexible pumping into the water, the water temperature of different length, depending on the temperature, the pumping of water cooling is about 1.1-1.7M, the pumping is not brittle, cut off not adhesion.
7, to observe the material color, shape, flexible heating power supply for the stop condition.
|